Multitech FaxFinder FF240 Specifications download pdf (Page 24)

BASIC FAXFINDER CONFIGURATION

Field Description

Confirm Password Re-enter the authorization password.

Local Port Enter the local port used for SIP. Default is 5060.

SIP Proxy Port Enter the SIP Proxy port, if required. Default is 5060.

Loose Routing Select on if your network allows loose source routing. Default is off, used if your network

requires strict source routing.

Use Registrar Check this if the FaxFinder needs to use a Registrar for SIP call routing.

Registrar If you checked Use Registrar, enter the SIP Registrar IP address.

Registrar Port If you checked Use Registrar, enter the Registrar port. Default is 5060.

Expires If you checked Use Registrar, enter the registrar expiration time in seconds. Default is

3600 seconds.

T.38

Fax ID Enter the Fax ID you want the FaxFinder to send out.

Fax Method Select the outbound fax method. Options are T.38 Re-invite, T.38 Direct, and T.30 Pass

Through. Default is T.38 Re-invite. Inbound faxes can use either option automatically.

Fax Codec Check the box for each outbound fax codec you want in use. G.711 A-law and G.711 µ-law

are available depending on your Fax Method (T.38 Re-invite only). Inbound faxes can use

either option automatically. Both options are checked by default.

Redundancy Level Enter a redundancy level for the FaxFinder. Default is 3.

Max Buffer Enter the maximum buffer for FaxFinder to use. Default is 4000.

Channel Reservation To reserve channels for specific use, enter the number of channels reserved for Inbound

Only or Outbound Only in these fields. Setting both fields to 0 configures all channels to

handle both incoming or outgoing faxes as needed. Default is 0 for both fields.

Max Rate Select the maximum fax transmission rate for the channels from the drop-down list.

Options are: 2400, 4800, 9600, 12000, 14400, 16800, 19200, 21600, 24000, 28800, 31200,

33600. Default is 14400.

Error Correction Check on to enable automatic fax error correction. Off turns off automatic error

correction. Default is on.

Dialing Rules To apply dialing rules, select the rules from the drop down list. Refer to Dialing Rules

Overview for information on setting up dialing rules.

Jitter Buffer Delay Enter the jitter buffer delay (in milliseconds) required by your network. Default is 300 ms.

Max Datagram Enter the maximum datagram size your network allows. Default is 948.

Extension Length Enter the extension length allowed for the channels.

Extension Source Select the extension source to be used by the FaxFinder. Options are: SIP To Header or

SIP Diversion Header. Default is SIP To Header.

Extension Digits Select the manner in which extension digits are used. Options are: Use All, Use First Only,

and Use Last Only. Default is Use All.

24 FaxFinder

Fax Server FF240-IP Administrator Guide

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 107 108

No comments

Multitech FaxFinder FF240 Specifications Page 24