Multitech MTCBA-H3-EN3-P1 User's Guide download pdf (Page 38)

Chapter 3 – Using the Web Management Software

Multi-Tech Systems, Inc. MultiModem rCell User Guide 38

PPP > Power-On Configuration

The Power-On Configuration feature allows you to set an initialization string that will be sent to the router upon

boot up.

Power-On Init String Configuration

Power-On Init String: You can enter a string of 0 to 40 characters that will be sent to the router upon boot up.

All commands will initialize before you proceed with regular PPP related activity.

Note: When no initialization string is configured, regular functionality of the router is retained.

PPP > Modem Commands

Setting up certain modem commands will allow an external application to query modem information (based on

the commands entered). The application can use the URL HTTP://xxx.xxx.xxx.xxx/modeminfor.html to get the IP

address that is currently assigned to the integrated cellular modem after the PPP connection is established. It also

will show the results of up to ten AT commands entered here.

Modem AT Commands Configuration

These commands will be sent every time a PPP connection to the network is initiated.

HSDPA AT Commands Examples:

AT+CGSN Product Serial Number

AT+CGMR Software Version

AT+CSQ Signal Quality

AT+CNUM Wireless Subscriber Number

AT+COPS? Network Information (Operator)

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 70 71

No comments

Multitech MTCBA-H3-EN3-P1 User's Guide Page 38