Multitech MTCBA-H3-EN3-P1 User's Guide download pdf (Page 28)

Chapter 3 – Using the Web Management Software

Multi-Tech Systems, Inc. MultiModem rCell User Guide 28

IP Setup > DDNS Configuration

DDNS (Dynamic Domain Naming System) is dependent upon cellular network/account configuration. DDNS

allows you to have a static domain name with a dynamic IP address. Whenever your dynamic IP address changes,

it is submitted to the DDNS server where your domain name is updated to point to the new IP address.

Note: You have to register with a DDNS server to use this feature.

General

DDNS: Check the Enable or Disable box. This enables/disables DDNS.

Default = Disable.

Use Check IP: Check the Enable or Disable box. If enabled, the program will query the server to

determine the IP address before it performs the DDNS update (the IP address is still

assigned by the wireless provider and the DDNS will be updated based on the address

returned by Check IP Server). If disabled, the program will perform the DDNS update

using the IP address that it obtains from the PPP link. Default = Enable.

Check IP Server: Enter the Server name from which the currently assigned IP address is obtained. This

check IP server is a server the router accesses to check it’s current IP address.

Check IP Port: Enter the port number of the Check IP Server. Default is 80.

Server: Enter the Server name to which the IP Address change is registered. Example:

members.dyndns.org

Port: Enter the Server port number. Default is 80.

Max Retries: Enter the maximum number of tries that will be allowed if the update fails.

Default = 5. Range is 0 – 100.

Update Interval: Enter the intervals in days that will be allowed to pass when there is no IP Address

change. At the end of this interval, the existing IP Address will be updated in the server

so that it will not expire. Default = 28 days. Range is 1 – 99 days.

System: Sets the system registration type as either Dynamic or Custom. Default = Dynamic.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 70 71

No comments

Multitech MTCBA-H3-EN3-P1 User's Guide Page 28