Multitech MTCBA-H3-EN3-P1 User's Guide download pdf (Page 51)

Chapter 3 – Using the Web Management Software

51 Multi-Tech Systems, Inc. MultiModem rCell User Guide

Local LAN Internal subnet of the local security gateway for which the security services should be

provided. If the router acts as a host, this should be configured as None.

Remote Gateway IP Interface where the IPSec tunnel ends. In the case of a Road Warrior with a Dynamic IP

address, this should be configured to ANY.

FQDN FQDN is a Fully Qualified Domain Name that resolves to the Local Wan IP of the router

or in the case of GRE/IPSEC, it is used to identify the Wan IP of the remote location. This

is provided by your ISP or created by you if you are using a Dynamic DNS service. When

FQDN is selected, the Remote Gateway IP should be left blank.

Remote LAN Internal subnet of the remote security gateway for which the security services should

be provided. If the remote end is the host, this should be configured as None.

UID (Unique Identifier String) Check the UID box to enable the Local ID and Remote ID.

Local ID and Remote ID are active only when UID is enabled.

Local ID Enter a string identifier for the local security gateway.

Remote ID Enter a string identifier for the remote security gateway.

NetBIOS Broadcast Check this option to enable broadcasts over the connection. It will allow computers on

the network to share Microsoft file and printer sharing information.

Click Save to save these settings.

Add Manual Connection

Add a Manual Connection

Connection Name Enter a text name that will identify the connection for you.

Compression Check the compression checkbox to enable IPCOMP, the compression algorithm.

Authentication Method Select the authentication algorithms to be used for the respective security services.

Options are: MD5-96 and SHA1-96.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 70 71

No comments

Multitech MTCBA-H3-EN3-P1 User's Guide Page 51