Multitech MTCBA-H3-EN3-P1 User's Guide download pdf (Page 22)

Multi-Tech Systems, Inc. MultiModem rCell User Guide 22

Chapter 3 - Web Management Software

Use the Web Management software to configures your router’s Ethernet functions.

Navigating the Web Management Software

This section explains the menu structure and the navigation buttons of the router’s Web Management software.

Menu Bar

IP Setup: Sets up a General Configuration, HTTP, DDNS, SNTP, Static Routes, and Remote

Configuration.

PPP: Sets up the PPP authentication, dial-on-demand, router authentication, and Wakeup on

Call.

Networks & Services: Defines networks and services to make them available to other functions such as

allowed packet filters, static routes, remote configuration, DNAT, and GRE tunnels and

routes.

Packet Filters: Defines filter rules, DNAT configuration, and ICMP rules.

GRE Tunnels: Generic Routing Encapsulation (GRE). Defines the remote network and the tunnel

through which traffic is to be routed.

DHCP Server: Configures the DHCP server settings.

IPSec: Allows device to support LAN-to-LAN VPN tunneling with 3DES and AES 128-192-256

encryption support

Tools: Sets DDNS Force Update, displays DDNS Status, resets the modem, and provides

screens for Firmware Upgrade, Load Configuration, and Save Configuration.

Statistics & Logs: Shows statistics and logs maintained by the router.

Save & Restart: Saves your settings and reboots.

Help Index: Accesses the online Help text.

Submit and Save & Restart

To save changes, click Submit on the bottom of most screens.

After saving changes, you need to restart for the changes to take effect. To restart, click Save & Restart on the

Menu bar. You can wait to restart until you finish changing settings on multiple pages.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 70 71

No comments

Multitech MTCBA-H3-EN3-P1 User's Guide Page 22