Multitech MTCBA-H3-EN3-P1 User's Guide Page 26
- Page / 71
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Chapter 3 – Using the Web Management Software
Multi-Tech Systems, Inc. MultiModem rCell User Guide 26
General Configuration
Date and Time: The system date and time display in these formats: MM/DD/YYYY / HH:MM:SS. A real
time clock is part of SNTP to display proper time.
IP Configuration
Enter the following addresses for the Ethernet interface.
IP Address: Default = 192.168.2.1
Mask: Default 255.255.255.0
Default Gateway: Default 0.0.0.0
Primary DNS: Default 0.0.0.0
Secondary DNS: Default 0.0.0.0
For more information, see Appendix A – Commonly Supported Subnets Reference Table.
Auto Dial out Configuration
Auto Dialout: Check the box to enable/disable Auto Dialout. Default = Enable. The Auto Dialout
settings allow you to use the integrated cellular modem directly with no router
functionality. This is accomplished using redirector software on your pc. This software
creates a virtual serial port allowing your pc to communicate with the integrated
cellular modem over IP using telnet.
Raw Dialout: Check the box to enable/disable raw mode for an Auto Dialout session. Default =
Disable.
Auto Dialout Login: Check the box to enable or disable Auto Dialout Login feature. Default = Enable. The
Auto Dialout port is the telnet port used by the redirector software on your pc to
communicate to the integrated cellular modem.
Auto Dialout Port: Enter the serial Auto Dialout Port number. Default = 5000.
Handle EIA Signal: Check the box to enable/disable the EIA standard signal characteristics (time and
duration) used between different electronic devices.
Inactivity: Enter the time in seconds that the auto dialout session will stay active before going
inactive.
Syslog Configuration
Syslog: Check the box to enable or disable Syslog. Default = Disable.
Syslog Server IP Address: If a Remote Syslog Server IP Address is specified, the syslog feature acts as a remote
Syslog.
Auto Discovery
Auto Discovery: heck the box to enable or disable Auto Discovery to broadcast (MAC level), the MAC
Address, IP Address, and DHCP information to the configured server port. Default =
Enable. The router will send a broadcast packet on the specified server port every 10
seconds or whatever interval the broadcast timer is set to.
- MultiModem® rCell 1
- Contents 3
- Introduction 6
- Package Contents 6
- Related Documentation 6
- Safety Warnings 7
- Lithium Battery 8
- Front Panel 9
- Specifications 10
- La certification UL ne 11
- Power Draw 12
- RF Specifications 12
- Chapter 2 - Installation 15
- Mounting the Router 16
- Setting the TCP/IP Address 16
- Chapter 2 – Installation 17
- Configuring the Router 18
- Wizard Setup 19
- Verifying Signal Strength 20
- Resetting the Router 21
- Screen Parts 23
- Screen Buttons 23
- Submenus 24
- IP Setup 25
- General Configuration 26
- IP Configuration 26
- Auto Dial out Configuration 26
- Syslog Configuration 26
- Auto Discovery 26
- Telnet Configuration 27
- General 28
- Authentication 29
- IP Setup > Static Routes 30
- Add Static Routes 31
- Remote Configuration 31
- PPP 32
- PPP General 33
- ICMP Keep Alive Check 33
- Modem Configuration 33
- PPP > Wakeup-on-Call 34
- Caller ID Configuration 35
- PPP > Modem Commands 38
- Networks & Services 39
- Packet Filter 41
- DNAT Configuration 42
- Packet Filters > Advanced 44
- GRE Tunnels 45
- DHCP Server 46
- Subnet Settings 47
- DHCP Fixed Configuration 48
- IPSec > IPSec 49
- Add IKE Connection 50
- Add Manual Connection 51
- Tools 54
- Load Configuration 55
- Statistics & Logs 56
- Reference Table 62
- WEEE Directive 66
- REACH Statement 67
- Standards 68
- Standards (in Chinese) 69
- Index 71
Related products and manuals for Networking Multitech MTCBA-H3-EN3-P1
Networking Multitech E Specifications
(34 pages)
(34 pages)
Networking Multitech MTCBA-C-N12 User Manual
(17 pages)
(17 pages)
Networking Multitech BL-Series User Manual
(60 pages)
(60 pages)
Networking Multitech MT5656SMI User Manual
(65 pages)
(65 pages)
Networking Multitech GPRS User Manual
(74 pages)
(74 pages)
Networking Multitech GFU19 User Manual
(14 pages)
(14 pages)
Networking Multitech GPRS User's Guide
(29 pages)
(29 pages)
Networking Multitech BL-Series User Manual
(60 pages)
(60 pages)
© 2020, manymanuals.com. All rights reserved. | 2.461 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals