Multitech MTCBA-H3-EN3-P1 User's Guide download pdf (Page 27)

Chapter 3 – Using the Web Management Software

27 Multi-Tech Systems, Inc. MultiModem rCell User Guide

Server Port: Enter the Server Port Number. Default port is 1020.

Broadcast Timer: Enter the amount of time in seconds for the auto-discovery packet granularity of

periodic broadcasting. Default is 10 seconds.

Auto Reboot Timer Configuration

Auto Reboot Timer: Enter the number of hours to lapse between each automatic reboot. The default of zero

deactivates the timer. Range is 0 to 999.

Telnet Configuration

Enables/Disables the Telnet port. The default is Enable. This is specifically for telnet port 23 for technical support

debug. You can still access the integrated cellular modem using port 5000 when this is disabled. Ensure that PPP is

also disabled before telnetting to the port.

IP Setup > HTTP Configuration

HTTP Configuration

HTTP Port: Enter the port number on which the HTTP server will listen for requests. Default is 80.

HTTP Time-out: Set the HTTP session in seconds. The default is 120 seconds.

Authentication

Username: Enter the Username that can access to the Web Management software. Default is

admin. This username and password are also used for telnet access to the router and

integrated cellular modem.

Password: Enter the Password for access to the Web Management software. Default is admin.

Notes: User name and password are case-sensitive.

Change the password to one that is more secure.

Passwords can be up to 100 characters.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 70 71

No comments

Multitech MTCBA-H3-EN3-P1 User's Guide Page 27