Multitech MultiVOIP 800 MVP800 User's Guide download pdf (Page 53)

Chapter 4 - MultiVOIP Software

MultiVOIP 400/800 Configuration

The MultiVOIP 800 Setup menu consists of 10 buttons, an Events window in the middle of the menu,

and a status bar at the bottom of the menu. The 10 buttons allow you to display and change the

voice channels and IP protocol parameters, display and manage the Phone Book listing, view

statistics and call progress, and change features such as SNMP Agent, Telnet Server, WEB Server,

and assign a MultiVOIP 400/800 password.

The Events window in the lower third of the Setup menu provides information about the boot process.

The status bar at the bottom of the Setup menu displays the current status of the unit and shows, for

example, if it is Running, the most recent date the unit was configured, the type of connection you

have to the unit, and your rights. It shows if your PC is connected directly to the command port of the

MultiVOIP 400/800 or is communicating with the Ethernet port. The last field on the status bar is the

Rights field which displays either Read/Write or Read only rights. The first user to communicate with

the MultiVOIP 400/800 has Read/Write rights that enable the user to view and/or change the

configuration of the MultiVOIP 400/800. Any additional users have Read Only rights and can only

display the configuration of the MultiVOIP 400/800 but are prohibited from changing the configuration.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 110 111

No comments

Multitech MultiVOIP 800 MVP800 User's Guide Page 53