Multitech MultiVOIP 800 MVP800 User's Guide download pdf (Page 48)

MultiVOIP 400/800 User Guide

Deploying the VOIP Network

With the Proprietary Protocol option enabled on the Phone Directory Database dialog box, the

VOIP Administrator must develop the VOIP Dialing Directory and deploy the pre-configured slave

MultiVOIP 400/800s to their remote sites. The remote site administrators need only connect power to

the pre-configured MultiVOIP 400/800, connect the MultiVOIP 400/800 to their Ethernet LAN and

predefined telephone equipment, and then wait for the phone directory database to be downloaded.

With the Gatekeeper option enabled on the Phone Directory Database dialog box, all MultiVOIP

400/800s are configured as “Master” and cannot be downloaded. In this case, each MultiVOIP 400/

800 Phone Book will be programmed with phone numbers for its own channels. These phone

numbers are remotely registered or pre-registered with the H.323 Gatekeeper (See the “Registering

with a Gatekeeper Phone Directory” section discussed earlier.

VOIP Administrator

The VOIP administrator is responsible for the following two steps.

1. Establish your VOIP Dialing Directory based on your Phone Directory Database for the numbers

to connect the MultiVOIP 400/800s to your VOIP network and the telephone extension number

you need to connect to the Voice/Fax channels. A sample VOIP Dialing Directory is provided

below for your consideration and use.

Note: The # character in the dialing sequence in the table below acts as a delimiter between the

VOIP phone number and the PBX extension.

To call from

Headquarters to

Sales Office

Call Process

Pick up telephone and dial a trunk extension

number (e.g., 1, 2, 3, or4).

Second dial tone is generated, dial the Sales

Office MultiVOIP (201).

Attendent connects you to Sales office

extension of called party

Dialing

Sequence

201#

5123

Headquarters to

Marketing Office

Pick up telephone and dial an extension

number (e.g., 1,2,3, or4).

Second dial tone is generated, dial the

Marketing Office MultiVOIP (401).

Third dial tone is generated, dial the line access

code (9).

Then dial the extension number of

your calling party (6128).

401#

6128

Headquarters to

Regional Office

Pick up telephone and dial an extension

number (e.g., 1,2,3, or 4).

Second dial tone is generated, dial the

Regional Office MultiVOIP (301).

301

Marketing Office

Headquarters

Pick up telephone and dial a trunk extension

number (e.g., 9 or 10).

Second dial tone is generated, dial the

Headquarters MultiVOIP (101)

Third dial tone is generated, dial extension

number of your calling party (4124).

101#

4124

Marketing Office

Regional Office

10#

301

VOIP Dialing Directory

Pick up telephone and dial a trunk extension

number (e.g., 9 or 10).

Second dial tone is generated, dial the

regional MultiVOIP (301) and telephone rings.

2. Send the slave MultiVOIP 400/800s to their remote sites.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 110 111

Comments to this Manuals

No comments

Multitech MultiVOIP 800 MVP800 User's Guide Page 48

Comments to this Manuals

Related products and manuals for Networking Multitech MultiVOIP 800 MVP800