Multitech MultiVOIP 800 MVP800 User's Guide download pdf (Page 60)

MultiVOIP 400/800 User Guide

In the Station Information group, the phone number does not have to be a conventional phone

number; for example, it does not have to be 717-5565. It can be a single digit or several digits. For

example, you could enter a phone number of 101 with a description of New York Office 1.

The Station Identification group enables you to assign the entry to a Hunt Group, provide the IP

Address, and accept the H.323 industry standard Port number. A Hunt Group is a series of

telephone lines organized in such a way that if the first line is busy the next line is hunted and so on

until a free line is found. It is a set of links which provides a common resource and which is assigned

a single hunt group designation. A user requesting that designation may then be connected to any

member of the Hunt Group.

To establish the phone directory database for a remote MultiVOIP 400/800, you do not have to enter

phone numbers, but you have to check the Slave option in the Database Type group. When you

click the Slave option, the Update Database From group becomes active. You need to enter the IP

address of the MultiVOIP 400/800 that you established as the Master.

Clicking the Slave Status button on the Phone Directory Database dialog box allows you to view

the status of all the slave units in your VOIP network (Send Status Report to Master must be

enabled on the Slave). The Phone Number of each Slave is displayed with its IP Address, current

line status, and the description of the phone number.

You can view the details of the current Hunt Group (e.g., HUNT GROUP #1) configuration by clicking

on the Phone Directory Database’s Hunt button. The current Phone numbers for HUNT GROUP #1

are displayed.

Highlight the Hunt Group you wish to view. The Phone no’s window displays the telephone numbers

associated with that Hunt Group and the No. of Entries field displays the running total of entries.

Note: You can change the name of the Hunt Group by clicking on the entry that you want to change,

editing the change in the Hunt Group name window, and then clicking the Set button.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 110 111

No comments

Multitech MultiVOIP 800 MVP800 User's Guide Page 60