Multitech MultiVOIP 800 MVP800 User's Guide Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 111
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
24
MultiVOIP 400/800 User Guide
Installing Your MultiVOIP Software
The following installation procedures do not provide every screen or option in the process of installing
the MultiVOIP 400/800 software. It is assumed that a technical person with a thorough knowledge of
Windows and the software loading process is doing the installation. Once you have installed the
software, you will be instructed on how to configure your MultiVOIP 400/800, and finally, on how to
deploy your MultiVOIP 400/800. Additional information on the MultiVOIP 400/800 software is provided
in the on-line Help.
Note: The phonebook directory configuration process is different depending on whether or not you
have an enabled H.323 Gatekeeper resident in your network. The section on “Configuring Your
MultiVOIP 400/800” will explain these differences.
The MultiVOIP 400/800 software and User Guide are contained on the MultiVOIP 400/800 CD. The
CD is auto-detectable, so when you insert it into your CD ROM drive it will start up automatically.
When you have finished configuring your MultiVOIP 400/800, you can view and print the User Guide
by clicking on the Install Manuals icon.
CAUTION: If you are installing a MultiVOIP 400/800 behind a Firewall, the Firewall must support
H.323. Refer to your Firewall user documentation to enable H.323 support.
1. Make certain that your MultiVOIP 400/800 has been properly cabled and that it is powered on.
2. Before you insert the MultiVOIP 400/800 CD into your CD ROM, you need to determine how you
will configure your MultiVOIP 400/800, via the LAN or connected directly to the Command port. If
you are configuring your MultiVOIP 400/800 via your network, you need to have your PC
configured for network communications (i.e., TCP/IP stack loaded). Your PC and the MultiVOIP
400/800 must be on the same physical LAN segment.
Insert the MultiVOIP 400/800 CD into a CD ROM drive. The CD is auto-detectable, so it starts
automatically. It may take 10 to 20 seconds for the Multi-Tech Installation CD screen to appear.
If the Multi-Tech Installation CD Screen does not appear automatically, click My Computer, then
right click the CD ROM drive icon, click Open, and then click the Autorun icon.
3. When the Multi-Tech Installation CD Screen is displayed, click the Install Software icon.
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 110 111

Comments to this Manuals

No comments