Multitech MultiVOIP 800 MVP800 User's Guide download pdf (Page 13)

Chapter 1 - Introduction and Description

Front Panel Description

The front panel contains three groups of LEDs that provide the status of the Ethernet connection,

Voice/Fax channels, and general status of the MultiVOIP. The front panel is shown in Figure 1-3, and

a description of each LED follows.

Figure 1-3. Front Panel

ETHERNET

RCV Receive Data indicator blinks when packets are being received from the local area

network.

LNK Link indicator lights when the Ethernet link senses voltage from a concentrator or

external device.

XMT Transmit Data indicator blinks when packets are being transmitted to the local area

network.

COL Collision indicator lights when a collision is detected on the Ethernet link.

VOICE/FAX CHANNEL

FXS Foreign Exchange Station indicator lights when the voice/fax channel is configured for

FXS operation.

FXO Foreign Exchange Office indicator lights when the voice/fax channel is configured for

FXO operation.

E&M Ear and Mouth indicator lights when the voice/fax channel is configured for E&M

operation.

FAX Fax indicator lights when there is fax traffic on the voice/fax channel.

XMT Transmit indicator blinks when voice packets are being transmitted to the local area

network.

RCV Receive indicator blinks when voice packets are being received from the local area

network.

XSG Transmit Signal indicator lights when the FXS-configured channel is off-hook, the FXO-

configured channel is receiving a ring from the Telco, or the M lead is active on the E&M

configured channel (i.e., the MultiVOIP is receiving a ring from the PBX).

RSG Receive Signal indicator lights when the FXS-configured channel is ringing, the FXO-

configured channel has taken the line off-hook, or the E lead is active on the E&M-

configured channel.

BOOT (BTG)

The BTG indicator lights when the MultiVOIP is booting or downloading setup.

POWER (PWR)

The Power indicator lights when power is applied to the MultiVOIP.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 110 111

No comments

Multitech MultiVOIP 800 MVP800 User's Guide Page 13