Multitech MULTIVOIP MVP-810ST User's Guide download pdf (Page 85)

MultiVOIP FX User Guide Technical Configuration

FXO Interface: Parameter Definitions*

Disconnect Options

Sequence 1

tone pair

These are DTMF tone pairs

constitute 2-part sequences that

signal call disconnection.

Values for first tone pair are:

*, #, 0, 1-9, and A-D.

Values for second tone pair are:

none, 0, 1-9, A-D, *, and #.

The tone pairs 1-9, 0, *, and #

are the standard DTMF pairs

found on phone sets. The tone

pairs A-D are “extended

DTMF” tones, which are used

for various PBX functions.

Silence

Detection

Y/N Enables/disables silence-

detection method of

supervising call disconnection.

Type (of

Silence

Detection)

One-Way or

Two-Way

Disconnection to be triggered

by silence in one direction only

or in both directions

simultaneously.

Timer (for

Silence

Detection)

integer values,

in seconds

Duration of silence required to

trigger disconnection.

Dialing Options

Regeneration Pulse, DTMF Determines whether digits

generated and sent out will be

pulse tones or DTMF.

Inter Digit

Timer

1 to 10 seconds This is the length of time that

the MultiVOIP will wait

between digits. When the time

expires, the MultiVOIP will

look in the phonebook for the

number entered.

Default = 2.

Inter Digit

Regeneration

Time

50 to 20,000

milliseconds

The length of time between the

outputting of DTMF digits.

Default = 100 ms.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 192 193

Comments to this Manuals

No comments

Multitech MULTIVOIP MVP-810ST User's Guide Page 85

Comments to this Manuals

Related products and manuals for Networking Multitech MULTIVOIP MVP-810ST