Multitech MULTIVOIP MVP-810ST User's Guide download pdf (Page 53)

MultiVOIP FX User Guide Mechanical Installation & Cabling

5. Repeat step 4 to connect the remaining telephone equipment to each channel on your MultiVOIP.

Although a MultiVOIP’s channels are often all configured identically, each channel is individually

configurable. So, for example, some channels of a MultiVOIP might use the FXO interface and others the

FXS.

6. Ensure that the unit is properly connected to earth ground by verifying that it is reliably grounded when

mounted within a rack.

This can be accomplished by connecting a grounding wire between the chassis grounding screw (see

Figure 3-6) and a metallic object that will provide an electrical ground.

7. Turn on power to the MultiVOIP by placing the ON/OFF switch on the back panel to the ON position.

Wait for the Boot LED on the MultiVOIP to go off before proceeding. This may take a few minutes.

With the connections made, you are ready to contact the web GUI and begin configuring the MultiVOIP.

Cabling Procedure for MVPFX2-2

Cabling involves connecting the MultiVOIP to your LAN and telephone equipment.

1. Connect the power cord supplied with your MultiVOIP to the power connector on the back of the

MultiVOIP and to a live AC outlet as shown in Figure 3-7.

Console Port Connection

Power Connection

Voice/Fax Channel 1 - 2

Connections

GND

FXS FXO

FX S

PSTN

FXO

FXS FXSFX O FX O

VOICE/FAX 1 WAN CONSOLE

10/ 100 RS- 232

VOICE/FAX 2 POWER

RJ-11

Connectors

RJ-45

Connectors

WAN/ Ethernet Connection

DB-9 Connector

Computer Serial Port

Figure 3-7: Cabling for MVPFX2-2

2. Connect the MultiVOIP to a PC by using a RJ-45 (male) to DB-9 (female) cable. Plug the RJ-45 end of the

cable into the Console port of the MultiVOIP and the other end into the PC serial port. See Figure 3-7.

3. Connect a network cable to the WAN 10/100 connector on the back of the MultiVOIP. Connect the other

end of the cable to your network switch.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 192 193

No comments

Multitech MULTIVOIP MVP-810ST User's Guide Page 53