Multitech MULTIVOIP MVP-810ST User's Guide Page 80

  • Download
  • Add to my manuals
  • Print
  • Page
    / 193
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 79
Technical Configuration MultiVOIP FX User Guide
80
FXS Loop Start Interface: Parameter Definitions (cont’d)
Field Name Values Description
FXS Options fields
Ring Count ,
FXS
1-99
Maximum number of rings that
the MultiVOIP will issue before
giving up the attempted call.
Current Loss Y/N
When enabled, the MultiVOIP
will interrupt loop current in
the FXS circuit to initiate a
disconnection. This tells the
device connected to the FXS
port to hang up. The Multi-
VOIP cannot drop the call; the
FXS device must go on hook.
Flash Detection Range fields
Min/Max for Min. and Max.,
50 - 1500
milliseconds
For a received flash hook to be
regarded as such by the
MultiVOIP, its duration must
fall between the minimum and
maximum values given here.
Caller ID fields
Type Bellcore
The MultiVOIP currently
supports only one
implementation of Caller ID.
That implementation is Bellcore
type 1 with Caller ID placed
between the first and second
rings of the call.
Enable Y/N
Caller ID information is a
description of the remote
calling party received by the
called party. The description
has three parts: name of caller,
phone number of caller, and
time of call. The ‘time-of-call’
portion is always generated by
the receiving MultiVOIP unit
(on FXS channel) based on its
date and time setup.
Page view 79
1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 192 193

Comments to this Manuals

No comments