Multitech MULTIVOIP MVP-810ST User's Guide download pdf (Page 52)

Mechanical Installation & Cabling MultiVOIP FX User Guide

Cabling Procedure for MVPFX2-4/8

Cabling involves connecting the MultiVOIP to your LAN and telephone equipment.

1. Connect the power cord supplied with your MultiVOIP to a live AC outlet and to the power connector on

the back of the MultiVOIP as shown at top right in Figure 3-6.

Console Port Connection

Voice/Fax Channel Connections

Channe ls 1- 4 Le ft-Mos t; for MVPFX2-4/8

Channels 5-8 Right-Most; for MVPFX2-8 only

FXS FXO

FXS

PSTN

FXO

RJ-11

Connectors

RJ-45

Connectors

Grounding

Screw

Grounding

Cable

DB-9 Connector to

Computer Serial Port

for Console Functions

WAN/Ethernet Connection

VOIP Control

through

Web GUI

Figure 3-6: Cabling for MVPFX-4/8

2. Connect the MultiVOIP to a PC by using an RF-45 (male) to DB-9 (female) cable. Plug the RJ-45 end of the

cable into the Console port of the MultiVOIP and the other end into the PC serial port. See Figure 3-6.

3. Connect a network cable to the WAN 10/100 connector on the back of the MultiVOIP. Connect the other

end of the cable to your network switch.

4. For an FXS connection: Examples - analog phone, fax machine,

Key Telephone System

Connect one end of an RJ-11 phone cord to the Channel 1 FXS connector on the

back of the MultiVOIP. Connect the other end to the device.

For an or FXO connection: Examples - PBX extension, POTS line from telco central office

Connect one end of an RJ-11 phone cord to the Channel 1 FXO connector on

the back of the MultiVOIP. Connect the other end to the phone jack.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 192 193

No comments

Multitech MULTIVOIP MVP-810ST User's Guide Page 52