Multitech MULTIVOIP MVP-810ST User's Guide download pdf (Page 69)

MultiVOIP FX User Guide Technical Configuration

Note that Voice/FAX parameters are applied on a channel-by-channel basis. However, once you have

established a set of Voice/FAX parameters for a particular channel, you can apply this entire set of

Voice/FAX parameters to other channels by using the Copy Channel button and its dialog box.

The Voice/FAX Parameters fields are described in the tables below.

Voice/Fax Parameter Definitions

Field Name Values Description

Default --

When this button is clicked, all

Voice/FAX parameters are set to their

default values.

Select

Channel

1-2 (FX2-2)

1-4 (FX2-4)

1-8 (FX2-8)

Channel to be configured is selected

here.

Copy

Channel

Copies the Voice/FAX attributes of one

channel to another channel. Attributes

can be copied to multiple channels or all

channels at once.

Voice Gain -- Signal amplification (or attenuation) in dB.

Input Gain

+31dB

–31dB

Modifies audio level entering voice

channel before it is sent over the network

to the remote VOIP. The default &

recommended value is 0 dB.

Output Gain

+31dB

–31dB

Modifies audio level being output to the

device attached to the voice channel. The

default and recommended value is 0 dB.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 192 193

No comments

Multitech MULTIVOIP MVP-810ST User's Guide Page 69