Multitech MULTIVOIP MVP-810ST User's Guide download pdf (Page 165)

MultiVOIP FX User Guide Operation & Maintenance

165

12. To confirm that the TFTP server IP address was indeed changed to the value you want, type printenv at the mvp-boot>

prompt and then press Enter.

13. If necessary, you can also change the IP address of the voip

(which is the ipaddress field in the ARMBoot environment)

and the IP address of the network gateway

(which is the gatewayip field in the ARMBoot environment)

For ipaddr, type setenv ipaddr a.b.c.d (where a, b, c, and d are the four octet values for the IP address of the TFTP server)

at the mvp-boot> prompt. Then press Enter.

For gatewayip, type setenv gatewayip a.b.c.d (where a, b, c, and d are the four octet values for the IP address of the TFTP

server) at the mvp-boot> prompt. Then press Enter.

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 192 193

No comments

Multitech MULTIVOIP MVP-810ST User's Guide Page 165