Multitech RF650VPN User Manual download pdf (Page 66)

FriendlyNET VPN Security Router

66

Advanced Settings

DHCP: Dynamic host configuration protocol automatically assigns

IP address to specified clients. Choose address pool range.

Reserve LAN IP addresses for selected devices (by MAC

addresses).

Virtual Server: De-Militarized Zone (DMZ) for specific IP address. Forward

service port range to specific LAN IP address.

Static Routing: Destination IP address, subnet mask and gateway address.

Dynamic Routing: Send (RIP 1, RIP 1/2) and receive (RIP 1, RIP 1/2).

LAN Filtering: Secure packet inspection (SPI) filters (block or pass) out-

bound LAN traffic based on specified protocols, IP address

range and destination service port ranges.

WAN Filtering: Secure packet inspection (SPI) filters (block or pass) in-

bound WAN traffic based on specified protocols, IP address

range and destination service port ranges.

Administration: Password, enable remote administration, remote admin

HTTP port, remote IP address and remote ping. Enable

system log, log server IP address and detail IPSec debug

log. Force PPPoE to reconnect. Force maximum transmis-

sion unit (MTU) size.

Dynamic DNS: Dynamic DNS server, host name, user name and password.

Accepts wildcards.

URL Filtering: Blocks access to targeted URLs

Email Alert: Sends system alerts and logs via email to email server and

destination email address. Schedule immediately, hourly,

daily (at specific time) or only when log is full.

System Tools

Intruder Detection: Identifies suspicious activity and protects against 11 differ-

ent types of denial of service (DoS) attacks, logs time, pro-

tocol, source IP address (and port), destination IP address

(and port) and describes event.

Routing Table: Displays type (INTF, RIP1), destination IP address, subnet

mask, gateway IP address and hop count.

System Status: Summarizes complete router configuration and status.

Settings: Saves or loads router settings from a file (or factory default).

Upgrade Firmware: Links to asante.com to check for latest firmware. Upgrade

firmware from a file.

Reset Device: Restarts router.

Security Features

Firewall: Hides local network addresses behind the router using Net-

work address translation (NAT). Secure Packet Inspection

(SPI) evaluates both inbound (WAN) and outbound (LAN)

packets.

Multitech RF650VPN User Manual Page 66

Comments to this Manuals

Multitech RF650VPN User Manual Page 66

Comments to this Manuals

Related products and manuals for Security access control systems Multitech RF650VPN