Multitech RF650VPN User Manual download pdf (Page 3)

User’s Manual

Quick Start Guide

This section will guide you through setting up the Asanté

FriendlyNET router with your Cable/DSL modem. Setting up your

router requires three basic steps:

1. Determine the TCP/IP settings for your computer and record

them in the table provided.

2. Set up your hardware. You MUST power up the router FIRST

after attaching any devices to the router.

3. Configure your router.

1. Determine Your TCP/IP Settings

You should already have a working Internet connection using a Ca-

ble/DSL modem. First you must collect the TCP/IP settings from

your computer and your Internet Service Provider (ISP). This infor-

mation will be used to configure your new router and any additional

computers you wish to add to your new network. The following sec-

tions explain how to collect your TCP/IP settings for Macintosh,

Windows, and Linux platforms.

Mac OS 9

1. Open your computer’s TCP/IP control panel found under the

Apple menu.

2. For Connect via, verify that either Ethernet built-in or the

Ethernet adapter installed in your Mac is chosen.

3. Complete the information in the Your Settings portion of the

table below.

1 2 3 4 5 6 7 8 ... 75 76

No comments

Multitech RF650VPN User Manual Page 3