Multitech MULTIVOIP MVP-810ST User's Guide download pdf (Page 234)

Technical Configuration (Analog/BRI) MultiVOIP User Guide

234

Voice/Fax Parameter Definitions (cont’d)

Field Name Values Description

AutoCall/Offhook Alert

Parameters

Auto Call /

Offhook

Alert

AutoCall,

Offhook

Alert

The AutoCall option enables the local

MultiVOIP to call a remote MultiVOIP

without the user having to dial a Phone

Directory Database number. As soon as

you access the local MultiVOIP

voice/fax channel, the MultiVOIP

immediately connects to the remote

MultiVOIP identified in the Phone

Number box of this option.

If the “Pass Through Enable” field is

checked in the Interface Parameters

screen, AutoCall must be used.

The Offhook Alert option applies only

to FXS channels.

The Offhook Alert option works like

this: if a phone goes offhook and yet no

number is dialed within a specific

period of time (as set in the Offhook

Alert Timer field), then that phone will

automatically dial the Alert phone

number for the voip channel. (The Alert

phone number must be set in the

Voice/Fax Parameters | Phone Number

field; if the voip system is working

without a gatekeeper unit, there must

also be a matching phone number entry

in the Outbound Phonebook.). One use

of this feature would be for emergency

use where a user goes off hook but does

not dial, possibly indicating a crisis

situation. The Offhook Alert feature

uses the Intercept Tone, as listed in the

Regional Parameters screen. This tone

will be outputted on the phone that was

taken off hook but that did not dial.

The other end of the connection will

hear audio from the “crisis” end as is it

would during a normal phone call.

1 2 ... 229 230 231 232 233 234 235 236 237 238 239 ... 558 559

Comments to this Manuals

No comments