Multitech MULTIVOIP MVP-810ST User's Guide download pdf (Page 249)

100

101

MultiVOIP User Guide Technical Configuration (Analog/BRI)

249

FXO Interface: Parameter Definitions (cont’d)

Field Name Values Description

Dialing Options (cont’d)

Inter Digit

Regeneration

Time

50 to 20,000

milliseconds

The length of time between the

outputting of DTMF digits.

Default = 100 ms.

FXO Disconnect On There are three possible criteria

for disconnection under FXO:

current loss, tone detection, and

silence detection.

Disconnection can be triggered

by more than one of the three

criteria.

Current Loss Y/N Disconnection to be triggered

by loss of current. That is,

when Current Loss is enabled

(“Y”), the MultiVOIP will hang

up the call when it detects a loss

of current initiated by the

attached device.

Current Loss

Detect Timer

integer values

(in milliseconds )

The minimum time required for

detecting the current loss signal

on the FXO interface. In other

words, this is the minimum

length of time the current must

be absent to validate ‘current

loss’ as a disconnection

criterion. Default = 500 ms.

Tone Detection Y/N Disconnection to be triggered

by a tone sequence.

1 2 ... 244 245 246 247 248 249 250 251 252 253 254 ... 558 559

Comments to this Manuals

No comments

Multitech MULTIVOIP MVP-810ST User's Guide Page 249

Comments to this Manuals

Related products and manuals for Networking Multitech MULTIVOIP MVP-810ST