Multitech MULTIVOIP MVP-810ST User's Guide download pdf (Page 245)

MultiVOIP User Guide Technical Configuration (Analog/BRI)

245

FXS Loop Start Interface: Parameter Definitions (cont’d)

Field Name Values Description

Flash Hook Options fields

Generation --

not applicable to FXS interface

Detection

Range

for Min. and Max.,

50 - 1500

milliseconds

For a received flash hook to be

regarded as such by the

MultiVOIP, its duration must

fall between the minimum and

maximum values given here.

Pass Through

Enable

Y/N

When enabled, this parameter

creates an open audio path

through the MultiVOIP.

If the Pass-Through feature is

enabled, the AutoCall feature

must be enabled for this voip

channel in the Voice/Fax

Parameters screen.

Caller ID fields

Caller ID Type Bellcore

The MultiVOIP currently

supports only one

implementation of Caller ID.

That implementation is Bellcore

type 1 with Caller ID placed

between the first and second

rings of the call.

Caller ID

enable

Y/N

Caller ID information is a

description of the remote

calling party received by the

called party. The description

has three parts: name of caller,

phone number of caller, and

time of call. The ‘time-of-call’

portion is always generated by

the receiving MultiVOIP unit

(on FXS channel) based on its

date and time setup.

1 2 ... 240 241 242 243 244 245 246 247 248 249 250 ... 558 559

Comments to this Manuals

No comments