Multitech MULTIVOIP MVP-810ST User's Guide download pdf (Page 169)

MultiVOIP User Guide Technical Configuration (T1/E1)

169

The SNMP Parameter fields are described in the table below.

SNMP Parameter Definitions

Field Name Values Description

Enable SNMP

Agent

Y/N Enables the SNMP code in the

firmware of the

MultiVOIP. This

must be enabled for the

MultiVOIP

to communicate with and be

controllable by the

MultiVoipManager software.

Default: disabled

Trap Manager Parameters

Address 4 places; n.n.n.n

n = 0-255

IP address of MultiVoipManager

PC.

Community

Name

-- A “community” is a group of VOIP

endpoints that can communicate

with each other. Often “public” is

used to designate a grouping where

all end users have access to entire

VOIP network. However, calling

permissions can be configured to

restrict access as needed.

Port Number 162

The default port number of the

SNMP manager receiving the traps

is the standard port 162.

Community

Name 1

Length = 19

characters (max.)

Case sensitive.

First community grouping.

Permissions Read-Only,

Read/Write

If this community needs to change

MultiVOIP settings, select

Read/Write. Otherwise, select

Read-Only to view settings.

Community

Name 2

Length = 19

characters (max.)

Case sensitive.

Second community grouping

Permissions Read-Only,

Read/Write

If this community needs to change

MultiVOIP settings, select

Read/Write. Otherwise, select

Read-Only to view settings.

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 558 559

Comments to this Manuals

No comments