Multitech MultiModem Cell MTCBA-C1 User's Guide Page 68
- Page / 135
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Chapter 13 – OMA / DM Control Commands
Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C) 68
128 (bit 7) Reserved
256 (bit 8) Activate download progress indication (<Event>=18)
512 (bit 9) Reserved
1024 (bit 10) Reserved
2048 (bit 11) Reserved
4096 (bit 12) Activate automatic registration indication (<Event>=22)
<Event>
0 Reserved
1 Reserved
2 Reserved
3 Reserved
4 The modem starts sending data to the server.
5 Authentication with the server failed.
6 The authentication has succeeded, a session with the server started.
7 The session with the server failed.
8 The session with the server is finished.
9 Reserved
10 A package was successfully downloaded and stored in flash.
11 An error occurred while downloading a package.
12 Reserved
13 Reserved
14 The firmware update process will be launched.
15 The firmware update has failed.
16 The firmware update has succeeded.
17 Reserved
18 Download progress. This event is returned without <Data> parameter to indicate
that a download starts. During the download, progress in total number of bytes
downloaded and download size is indicated in <Data> parameter.
19 Reserved
20 Reserved
21 A provisioning was made by the server
22 Automatic registration status
<Data> Specific data for some <event>
For <Event>=15, <Data> indicates the failure reason.
For <Event>=18, <Data> indicates the progress as
“,<percentage downloaded>”,<download size>.
For <Event>=21, <Data> indicates the parameters which was provisioned
10: Preferred Roaming List (PRL)
For <Event>=22, <Data> indicates the status of the automatic registration
0: registration in progress
1: Registration failed (after retries)
2: Registration succeeded
Parameter Storage:
The <Level> parameter is stored in EEPROM without using AT&W command. The default value
can be restored using AT&F.
Command Availability:
This command is available when the modem has finished its initialization and the
+WIND: 3 unsolicited event is received by the application.
Results:
This command returns OK when the command is processed correctly.
This command returns +CME ERROR: 3 when the parameter is out of range.
ERROR Responses: +CME ERROR: 3 (means parameter is out of range).
- CDMA-C1 AT Commands 1
- Contents 3
- Chapter 1 – Introduction 7
- Chapter 2 – AT Commands 8
- Overview 8
- Command Types 9
- Command Format and Syntax 9
- Input Command Syntax 10
- Other Syntax 10
- Output Response Syntax 10
- Parameter Defaults 10
- Unsolicited Message Syntax 11
- Attention AT 12
- Repeat Last Command A/ 12
- Echo E 12
- Bits +WUSLMSK 13
- Chapter 4 – Identification 15
- Commands 15
- Chapter 5 – Query Commands 17
- Chapter 6 – Global 18
- Configuration Commands 18
- Save Configuration &W 19
- Chapter 7 – Status Commands 20
- Chapter 8 – Communication 26
- Set Diagnostic Port +WDMX 27
- Set DCD Signal &C 27
- Set DTR Signal &D 28
- Set DSR Signal &S 28
- Automatic Answer S0 30
- Command Edit Character S5 31
- Chapter 9 – Call Control 33
- Hang-Up Command H 34
- Answer a Call A 34
- Incoming Call +RING 35
- Emergency Mode +WSOS 37
- Call Answered +WANS 38
- Call Connected +WCNT 38
- Call Ended +WEND 39
- Call Originated +WORG 40
- CPHS Command +CPHS 40
- Call Forwarding +CCFC 42
- Send DTMF Tones +VTS 44
- Chapter 10 – Network Service 45
- Signal Quality +CSQ 46
- Band Preference +WBND 49
- Service Indication +WSRV 50
- Roam Preference +WRMP 50
- Default Cell Band +WDCB 51
- Roaming Indication +WROM 51
- Chapter 11 – Provisioning 54
- Control Commands 54
- Excess SPC Failures +WLCK 55
- Download PRL +DPRL 56
- Commit Changes +WCMT 58
- Set IMSI +WIMI 58
- Slot Cycle Index +WSCI 60
- SID and NID +WSID 60
- Chapter 12 – OTASP / OTAPA 61
- Commit Successful +WOTC 62
- SPL Unlocked +WOTS 62
- NAM Download OK +WOTN 62
- MDM Download OK +WOTM 62
- IMSI Download OK +WOTI 63
- PRL Download OK +WOTP 63
- Chapter 14 – Short Message 70
- Service Control Commands 70
- Read Message +CMGR 71
- List Message +CMGL 72
- Delete Message +CMGD 73
- Chapter 15 – Audio Commands 79
- Microphone Gain +VGT 81
- Speaker Gain Control +VGR 82
- Digital Gain Receive +WDGR 84
- Echo Cancellation +ECHO 86
- Speaker Driver Gain +WSDG 87
- Audio Loopback &T 88
- Chapter 16 – Data Commands 89
- R-SCH Selection $QCMIP 90
- MIP Selection $QCMIPP 91
- Chapter 17 – TCP APP AT 98
- Chapter 18 – Sleep Commands 107
- Builds) 111
- Chapter 19 – Antenna 111
- Commands (Not for IP and GPS 111
- +WANTPOLL 113
- Auxiliary GPS Power +WANT 115
- Scenarios 118
- Call Processing 119
- Sending Binary Data 120
- TCP Socket Examples 121
- TCP Server Example 122
- ATZ, and AT&F 123
- Chapter 22 – CDMA 128
- Terminology and Acronyms 128
Related products and manuals for Networking Multitech MultiModem Cell MTCBA-C1
Networking Multitech CDMA User's Guide
(32 pages)
(32 pages)
Networking Multitech ISIHP-4U User's Guide
(50 pages)
(50 pages)
Networking Multitech MVP 800 User's Guide
(88 pages)
(88 pages)
Networking Multitech ISIHP-4U Specifications
(44 pages)
(44 pages)
Networking Multitech MT5634ZBAV User's Guide
(170 pages)
(170 pages)
Networking Multitech GFU19 User Manual
(158 pages)
(158 pages)
Networking Multitech GFU19 Specifications
(18 pages)
(18 pages)
Networking Multitech MTC-C2 User's Guide
(34 pages)
(34 pages)
© 2020, manymanuals.com. All rights reserved. | 1.703 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals