Multitech MultiModem Cell MTCBA-C1 User's Guide download pdf (Page 97)

Chapter 16 – Data Commands

Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C) 97

Set Home HA IP Address $QCMIPHA

Description: This command is used to set the home HA address of the mobile for the currently active profile.

The command takes two arguments, a string corresponding to the IP address of the HA to be

stored and a number (either 0 or 1) indicating whether or not to commit this value to NV. The IP

address should be formatted in standard dotted-decimal notation; e.g., “10.1.1.20”.

Syntax: Command syntax: AT$QCMIPHA =<IP>,<Val>

Command Possible Responses

AT$QCMIPHA?

Note: Display the current setting.

$QCMIPHA: 10.1.1.20, 0

AT$QCMIPHA =?

Note: Display the range of values.

$QCMIPHA: ((0-255).(0-255).(0-255).(0-255)),(0-1)

AT$QCMIPHA =10.1.2.15,1

Note: Set to 10.1.2.15, and commit to

NV.

Values: <IP> IP address in standard dotted-decimal notation; e.g., “10.1.1.20”.

<Val>

0 Do not commit to NV

1 Commit to NV

Note: If the value provisioned is not committed to NV, the temporary value will be deleted.

Max Number of MIP NAI User Profiles Indicator $SPNAI

Description: AT$SPNAI Network Access Identifier AT$SPNAI? 0,1:

0 -> The device does not support the ability to enter up to six different NAI profiles through the

user interface.

1 - > The device supports the ability to enter up to six different NAI profiles through the user

interface.

Syntax: Command syntax: AT$SPNAI?

Command Possible Responses

AT$SPNAI?

Note: Get max number of MIP profiles

indicator

Note: Device supports the ability to enter up to 6

different NAI profiles

Note: Device does not support the ability to enter

up to 6 different NAI profiles

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 134 135

No comments

Multitech MultiModem Cell MTCBA-C1 User's Guide Page 97