Multitech PROXYSERVER MTPSR1-120 User's Guide download pdf (Page 46)

Dual Ethernet ProxyServer User Guide

Remote Management

This section describes typical client applications that can be used to configure the ProxyServer

remotely. It is important to note that although any subsequent changes to configuration can be

made using these applications, the initial setup and configuration of the ProxyServer must be

done on the local PC, using the ProxyServer software provided with your unit.

Although establishing access to the ProxyServer varies between applications, the configuration

functions mirror those of the ProxyServer software. For more information on ProxyServer

software, refer to Chapter 4 - Proxy Server Software.

Telnet

A typical Telnet client application is described in this chapter. The Firewall ProxyServer has a

built-in Telnet Server that enables Telnet client PCs to access the ProxyServer. A typical Telnet

client is allowed to configure the ProxyServer and WAN devices. A typical TCP/IP program group

is shown below with a Tcpman icon and a Telnet icon.

The TCP/IP stack has to be loaded before the Telnet client (a Windows application) will run, and

the Telnet Server option has to be selected from the Applications Setup dialog box using Firewall

Configuration (see Chapter 4 - Applications). Double click on the Telnet icon (or shortcut) and a

blank Telnet screen is displayed. Click Connect | Remote System and the Connect dialog box is

displayed. Select (or enter) a Host Name (the IP address of the ProxyServer). In this example,

the Host Name is 192.168.2.4.

When you enter a valid Host Name (IP address) and click on Connect, you are immediately

connected to the target ProxyServer and the Firewall Management Menu screen is displayed.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 59 60

No comments

Multitech PROXYSERVER MTPSR1-120 User's Guide Page 46