Multitech PROXYSERVER MTPSR1-120 User's Guide download pdf (Page 32)

Dual Ethernet ProxyServer User Guide

Changing IP Parameters

The IP Setup dialog box establishes the IP addressing for your private LAN, Public LAN, and, if

the Proxy Server is directly connected to the Internet, the WAN port. To change the IP Setup

parameters that were configured during the initial setup, click on the IP button in the Firewall

Setup menu. The IP Setup dialog is displayed.

The Secured LAN Port Parameters group is used to assign the Ethernet parameters of your

private LAN (LAN 1) port. If a router is used to connect a second private LAN, the IP address of

that router is also entered in this group.

IP Address - This field defines the IP address of the private LAN (LAN 1) port on the

ProxyServer. This must be a unique host IP address that falls in the LAN IP network, and can

be an unregistered address.

Net Mask - This field defines the Subnetwork Mask of the private LAN (LAN 1) port on the

ProxyServer.

Default Route - This field defines the IP address of a router on the private LAN that connects

a second private LAN to the ProxyServer.

The Internet LAN Port Parameters group is used to configure the public LAN (LAN 2) port. The

parameters of this group will vary, depending on the LAN configuration. The Internet LAN Port

Parameters group defines the static or dynamic addressing scheme for the public LAN (LAN 2)

DHCP Client - If this option is active, the Internet Services Provider (ISP) is able to

dynamically provide the registered Internet IP addresses. If a static IP addressing scheme is

provided by the ISP, then the DHCP Client option must be deactivated and the IP Address

field becomes active. The static IP address is then entered in this field.

IP Address - If the DHCP Client option is active, this address is dynamically

assigned by the ISP. If the DHCP Client is inactive, then the static IP address of the

router connected to the Internet Services Network is entered in this field.

Net Mask - If the DHCP Client option is active, the Net Mask is dynamically assigned

by the ISP. If the DHCP Client is inactive, then the Net Mask of the router connected

to the Internet Services Network is entered in this field.

DHCP Relay Agent - Enabling this option allows the ProxyServer to relay IP address

requests from the Internet to the DHCP server through the WAN. If this option is enabled, the

DHCP Server Address field becomes active, and the IP address of the DHCP server must be

entered.

DHCP Server Address - If the DHCP Relay Agent option is active, enter the IP

address of the DHCP server in this field.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 59 60

No comments

Multitech PROXYSERVER MTPSR1-120 User's Guide Page 32