Multitech PROXYSERVER MTPSR1-120 User's Guide download pdf (Page 34)

Dual Ethernet ProxyServer User Guide

Changing WAN Port Parameters

In order to change the WAN port parameters of a DCE device connected to the RS232/V.35

connector on the ProxyServer, click on the WAN button in the Firewall Setup menu. The WAN

Port Setup dialog box is displayed.

From this dialog, you can configure the parameters of the WAN port. To enable the WAN port,

click on the Port Enable check box.

The Mode group allows you to configure the WAN interface to match the DCE device connected

to the RS232/V.35 port on the ProxyServer. Options include Asynchronous or Synchronous

mode. If asynchronous is chosen, you can select the proper Baud speed. If synchronous is

chosen, External Clocking or Internal Clocking must be selected.

The Connection Method group allows you to configure the port as Direct Connect/Leased

Line, Answering or Dialing, and allows you to select the Modem Type and Dial Number for the

DCE device.

For a detailed description of each field, refer to the on-line help provided with your Firewall

software.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 59 60

No comments

Multitech PROXYSERVER MTPSR1-120 User's Guide Page 34