Multitech MTCMR-H User's Guide Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
Chapter 4 – Device Configuration
Multi-Tech Systems, Inc. MultiConnect AW User Guide 22
GPRS Cellular Port Configuration
MultiConnect AW Security
Option Default Selection
O) PhyTimeout (Min)
15 Min
The Physical Time out option is a time limit in which
the MultiConnect AW will drop the connection to the
cellular network if no activity is sensed on the
network. The range is zero to 255 minutes, with 0
disabling the time out. The default is 15 minutes.
Normally, this option should be left in the default
value.
P) DLE Mode
1
DLE Mode 0 is enabled, no specific process is
needed on [ETX] characters. This means that is not
possible for a host to request an end of connection
or to receive a clear indication of the end of a
connection from the TCP/IP stack.
DLE Mode 1 is enabled, the [EXT] characters
means a request or an indication of end of
correction. As a consequence, [EXT] characters that
belong to the payload must be sent by the host on
the serial port preceded by a DLE character.
Similarly, EXT characters received by the TCP/IP
stack from the Internet are sent to the host through
the serial port preceded by a DLE character.
Q) TCP TxDelay 100
milliseconds
This option determines the time delay introduced
before sending a TCP frame that has not been
entirely filled with user data. The time is entered in
milliseconds, and it should be noted that a value of 0
initiates the sending of a TCP frame as soon as
possible after the reception of a single character
value from the host.
R) Handshake TimeOut
(sec)
90 seconds
The handshake timeout is a wireless modem
timeout of between 1 and 255 seconds. Default is 90
seconds.
MultiConnect AW Security
Option Default Selection
Z) Enter Wireless
Modem Command
Mode
This option opens the command port on the wireless
modem to enter AT commands.
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Comments to this Manuals

No comments