Multitech MTCMR-H User's Guide download pdf (Page 11)

Chapter 2 – Activation and Installation

Connect the Antenna, Serial Cable, Modem Cable, and

Power

MT100A2W-G

MT100A2W

1. Connect a suitable antenna to the ANT connector on the MT100A2W-G model, (see antenna specifications

in Chapter 1).

2. Connect the DE9 connector (9-pin) of the RS232 cable to the COMMAND connector on the unit and connect

the other end to serial port on your PC.

3. For the MT100A2W model, connect an RS232 cable, male connector, to the MODEM connector on the back

of the unit. Connect the other end of the cable to your external wireless modem.

4. Connect the RJ 11 phone cable to the DIAL connector on the unit and connect the other end of the phone

cable to the customer’ s analog modem.

5. Remove the protective shipping cover. Attach the appropriate input connector to the power supply module

by holding down on the slide lock and tipping the input connector to fit into the notch on top of the module

and then lowering it into the slide lock. Then release the slide lock.

6. Screw-on the power lead from the power supply module to the power connection on the unit. Now, plug the

power supply into your power source.

Multi-Tech Systems, Inc. MultiConnect AW User Guide 11 

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

No comments

Multitech MTCMR-H User's Guide Page 11