Multitech FaxFinder FF240 User's Guide download pdf (Page 38)

Chapter 3: Web Management Interface

Multi-Tech Systems, Inc. FF240-IP Admin User Guide 38

Save/Restore

After you have entered the specific settings to have your FF240-IP working in your environment, coming

here to save those settings is a good idea. Were something to happen and you lost what had been

entered, you can easily reset the unit to working condition if you have a saved configuration file.

Save/Restore Configuration

Save Config

The Save Config link will save settings entered during this session to a configuration file that can

be retrieved later using the restore configuration option.

Click on the Save File button, and then click OK. When saving a configuration file, try and use a

place that will help you remember where it is stored.

Restore Factory Defaults

Clicking this link will reset all data in the FF240-IP to the default values that were set at the

factory. Use this with caution. This will reboot the FF240-IP.

Restore Config

Click on the Br

owse button after the box to navigate to a previously saved configuration file.

Once selected, click the Restore button to have those saved values used once again.

Restore button

Once

a saved configuration file has been entered in the restore config box, clicking the restore

button will use those values that were retrieved above, to set up the FF240-IP with the values

saved in that configuration file. This will reboot the FF240-IP.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 125 126

No comments

Multitech FaxFinder FF240 User's Guide Page 38