Multitech RF825-E-AP User's Guide Page 93

  • Download
  • Add to my manuals
  • Print
  • Page
    / 104
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 92
Appendix B – Antenna for the Wireless RouteFinder
Multi-Tech Systems, Inc. RouteFinder RF825/RF825-AP User Guide (Document Number S000422B) 93
Appendix B – Antenna for the
Wireless RouteFinder
The Access Point Antenna
Your ship kit for the wireless RouteFinder includes a 2.4 GHz 5dBi SWI-Reverse-F Swivel Antenna.
Important Notes:
The antenna for this product must be a reverse polarity SMA antenna.
The antenna must be attached in order for the RouteFinder access point to be operational.
Antenna Electrical Characteristics
Frequency: 2400 to 2500 MHZ
Gain: 4.5dBi (nominal)
VSWR: 2
Polarization: Linear, Vertical
Maximum Power: 20W
Impedance: 50 Ω
Connector: RP-SMA Plug
Reverse Polarity Meets FCC Part 15.203 Requirements
Mechanical
Testing Condition Note: Non-operating during test.
Endurance
Number of connection/disconnection of the connector: 500 cycles
Number of 360° rotation of the connector: 1000 cycles
Mandatory: Guaranty of functionalities after test
Bending
Number of 90° at the hinge parts and bending on one direction with 1kg force: 1000 cycles
Mandatory: No mechanical damage tolerated. Guaranty of functionalities after test.
Antenna Resistance
Tests are applicable to all parts and both sides.
Traction
Tractions force applied 3 times on plugs during 15 seconds: 5kg
Mandatory: No mechanical damage tolerated. Guaranty of functionalities after test.
Environmental
Storage
Condition: Non-operating during test.
Cold: -40°C during 72h (IEC 68-2-1 standard Ab/Ad test)
Dry Heat: +80°C during 96h (IEC 68-2-2 standard Bb/Bd test)
Humidity: +40°C at 95% R.H. during 4 days (IEC 68-2-56 standard Cb test)
Mandatory: No mechanical or visible damage tolerated. Guaranty of functionalities after test.
Operation
Condition: Operating during test.
Cold: -10°C during 48h (IEC 68-2-1 standard Ab/Ad test)
Dry Heat: +55°C during 48h (IEC 68-2-2 standard Bb/Bd test)
Humidity: -10°C to +55°C at 95% R.H. 4 cycles (IEC 68-2-30 standard Nb test)
Mandatory: No mechanical or visible damage tolerated. Guaranty of functionalities during and after
test.
Page view 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 103 104

Comments to this Manuals

No comments