Multitech RF825-E-AP User's Guide download pdf (Page 46)

Chapter 5 – Using the RouteFinder's Web Management Software

Multi-Tech Systems, Inc. RouteFinder RF825/RF825-AP User Guide (Document Number S000422B) 46

Networks & Services > Service Configuration

Service Configuration

Name

Enter the name of network or host you want added to the list. This name has to unique; in other

words, it should not be present in the displayed list. A space cannot be used in the name; it is

considered an invalid character. After you have entered the name, click the Add button.

Protocol

Select from the following protocols: TCP, UDP, TCP & UDP, ICMP, AH, and ESP. When you select

one of the protocols, the fields to the right will change according to the protocol selected.

TCP, UDP, and TCP& UDP

S-Port/Client

Enter the source port for the service. The entry options are a single port (e.g. 80), a list of

port numbers separated by commas (e.g. 25, 80, 110), or a port range (e.g. 1024:64000)

separated by a colon (:).

D-Port/Server

Enter the Destination port.

ICMP

ICMP Type

Choose the Type from the drop down box.

ICMP Code

Choose the Code from the drop down box.

AH and ESP

SPI Value

Enter the SPI value.

Editing and Deleting User-Added Services

There are options for editing or deleting the user added services. However, there are some standard

services which cannot be edited or deleted. If the service is used by the Packet Filter rules, SNAT, or

DNAT, it cannot be deleted.

For editing any user-defined service, the Edit button has to be clicked to get the fields corresponding

to the service entry.

Edit By clicking Edit in the Options column, the information is loaded into the entry menu of

the Edit Service screen. You can then edit the entry. You can edit user-added services

only. The entries can be saved using the Save button.

Delete By clicking Delete in the Options column, the service is deleted from the Services table.

Changes can be saved using the Save button.

Notes About Protocols

• TCP & UDP allow both protocols to be active at the same time.

• The ICMP protocol is necessary to test network connections and RouteFinder functionality, as

well as for diagnostic purposes. In the Packet Filter > ICMP menu you can enable ICMP

Forwarding between networks, as well as RouteFinder ICMP reception (e.g., to allow ping

support).

• The ESP protocol is required for Virtual Private Network (VPN).

• The AH protocol is required for Virtual Private Network (VPN).

• For AH and ESP, the SPI is a whole number between 256 and 65536, which has been mutually

agreed upon by the communication partners. Values below 256 are reserved by the Internet

Assigned Numbers Authority (IANA).

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 103 104

Comments to this Manuals

No comments

Multitech RF825-E-AP User's Guide Page 46

Comments to this Manuals

Related products and manuals for Gateways/controllers Multitech RF825-E-AP