Multitech RF825-E-AP User's Guide Page 41
- Page / 104
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Chapter 5 – Using the RouteFinder's Web Management Software
Multi-Tech Systems, Inc. RouteFinder RF825/RF825-AP User Guide (Document Number S000422B) 41
Administration > Tools
Administration > Tools
There are three tools that can help you test and maintain network connections and RouteFinder functionality.
Ping and Trace Route test the network connections on the IP level.
The DDNS Client is used to update the IP address of the modem/router in a DDNS server for the configured
domain name
whenever the IP Address changes, thus, leaving the domain name to be pointing to the
current IP Address of the modem/router all the time.
Notes
1. For these tools to function, the ICMP on firewall function in Packet Filter > ICMP must be enabled.
2. For the Name Resolution function, enable the DNS proxy function in Proxy > DNS Proxy. To use the
Name Resolution function, enable a name server in the menu (item) Proxy > DNS Proxy. When the
Name Server is enabled, the IP addresses of the reply packets will be converted into valid names.
PING
Ping is an acronym for Packet Internet Groper. The PING utility is used as a diagnostic tool to determine if
a communication path exists between two devices on the network. The utility sends a packet to the
specified address and then waits for a reply. PING is used primarily to troubleshoot Internet connections,
but it can be used to test the connection between any devices using the TCP/IP protocol.
If you PING an IP address, the PING utility will send four packets and stop.
If you add a -t to the end of the command, the PING utility will send packets continuously.
Host Specify the IP address/name of the other PC for which connectivity is to be checked.
No. of Pings Select the number of pings. You can choose 3 (the default), 10 or 100 pings. Enter
the IP address or the name into the Host entry field (e.g., port 25 for SMTP).
Timeout Specify the time that packets can exist.
Packet Size Specify the number of data bytes to be sent.
Start Button After clicking Start, a new window opens with the PING statistics accumulating.
- RouteFinder 1
- Contents 3
- Chapter 1 – Introduction and 6
- Product Description 6
- Feature Details 7
- RouteFinder Documentation 8
- Safety Warnings 9
- Front and Back Panels 10
- Signal Strength AT Commands: 11
- Definition of xx Values 11
- CDMA & EDGE Back Panel 12
- Back Panel Connectors 12
- Application Example 13
- RF825-AP Specifications 14
- EDGE Specifications 15
- CDMA Specifications 15
- Specifications Description 16
- Chapter 2 – Cabling the 17
- RF825-AP Cabling 18
- Chapter 3 – Setting Up a 19
- Workstation and a Wireless 19
- Account 19
- Setting a Fixed IP Address 20
- Provider’s Service 21
- Command Examples 24
- Chapter 4 – Configuring the 25
- Navigating the Screens 26
- Sub-Menus 27
- Wizard 28
- The Wizard Setup Screen 29
- ISP Settings 30
- • WAN PPPoE Choice 31
- Admin Password 32
- Save, Reset 32
- Save to Flash Memory 33
- Restart 33
- Testing Your Workstation 33
- Web Management Software 34
- Auto Reboot Timer 35
- Administrative Access 36
- Change Password 37
- Remote Syslog 38
- SNTP Configuration 39
- Administration > Tools 41
- Trace Route 42
- DDNS – WAN 42
- Reset Modem 42
- Reset to Factory Defaults 42
- Networks & Services 43
- Network Configuration Fields 44
- How to Confirm Your Entries 44
- Important Network Notes: 44
- Service Configuration Screen 45
- Service Configuration 46
- Notes About Protocols 46
- Network Setup 47
- WAN Choice: Static IP 48
- WAN Choice: PPPoE 49
- WLAN Settings 50
- WLAN Security 51
- This is the WAP-PSK screen 52
- This is the WPA2-PSK screen 52
- Modem Initialization Strings 57
- PPP Keep-Alive Parameters 57
- PPP/Internet Keep-Alive URLs 57
- Network Setup > SNAT 61
- Network Setup > DNAT 62
- Packet Filters 63
- Packet Filter > ICMP 66
- VPN > IPSec 67
- Add an IKE Connection 68
- Add IKE Connection 68
- Add a Manual Connection 70
- Add Manual Connection 70
- VPN > PPTP 72
- User Authentication 73
- Proxy > HTTP Proxy 74
- Proxy > Custom Filters 75
- Proxy > DNS Proxy 76
- DHCP Server 77
- Fixed Addresses 78
- Utilities 79
- Statistics & Logs 80
- Chapter 6 – Troubleshooting 85
- CDMA Troubleshooting 87
- EDGE Troubleshooting 87
- Chapter 7 – Frequently Asked 88
- Questions 88
- EDGE FAQs 90
- CDMA FAQs 90
- Supported Subnet Addresses 91
- Appendix B – Antenna for the 93
- Wireless RouteFinder 93
- The Wireless Antenna 94
- Glossary 96
Related products and manuals for Gateways/controllers Multitech RF825-E-AP
(8 pages)© 2020, manymanuals.com. All rights reserved. | 1.807 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals