Multitech MultiModem DSVD MT5600DSVD User's Guide download pdf (Page 6)

MultiModemDSVD Quick Start Guide

RS232 Connection

Plug one end of the serial cable into the RS232 connector on the

modem and the other end into a serial port connector on your

computer, such as COM1 or COM2.

Line Connection

Plug one end of the phone cable into the modem’s LINE jack and

the other end into a phone line wall jack.

Note: The LINE jack is not interchangeable with the PHONE jack.

Do not plug the phone into the LINE jack or the line cable into the

PHONE jack.

Phone Connection

For voice-only calls, you can optionally plug a telephone into the

modem’s PHONE jack.

Speaker Connection (MT5600DSVD only)

Plug the speaker plug of the supplied headset into the SPKR jack

on the side of the modem. Optionally, use a 1/8-inch-plug male-to-

male stereo patch cord to connect the SPKR jack on the side of

the modem to the LINE IN jack on your sound card.

If you do not have a sound card, you can plug an amplified

speaker directly into the SPKR jack.

Microphone Connection (MT5600DSVD only)

Plug the microphone plug of the supplied headset into the MIC

jack on the side of the modem. Optionally, plug an unamplified

microphone into the MIC jack. The microphone should have a 1/8-

inch mini plug.

Power Connection

Plug the power supply module into an AC power outlet or surge

protector. Plug the power supply’s cable into the PWR jack on the

modem.

For protection against power surges and other transient voltages,

we recommend that you plug the modem into a surge protector

rather than directly into a wall outlet, preferably one that provides

protection against electrical spikes on the telephone line as well as

on the power line. Please note, however, that not even a surge

protector can guard against damage from a nearby lightning strike.

For maximum protection during an electrical storm, you should

unplug all your computer equipment.

1 2 3 4 5 6 7 8

No comments

Multitech MultiModem DSVD MT5600DSVD User's Guide Page 6