Multitech GFU19 User's Guide

MultiConnect®Cell 100Series MTC-EV3 User Guide

PRODUCT OVERVIEWDimensions10 MultiConnect®Cell 100 Series MTC-EV3 User Guide

INSTALLING AND USING THE DEVICEInstalling and Using the DeviceInstalling the Device1. Connect a suitable antenna to the antenna connector.2. If you ar

INSTALLING AND USING THE DEVICE5. To have the device enter sleep mode, set DTR to inactive (off) on the RS-232 interface. The clear to send(CTS) signa

ANTENNA AND ACTIVATION INFORMATIONAntenna and Activation InformationAntennaThe antenna intended for use with this unit meets the requirements for mobi

ANTENNA AND ACTIVATION INFORMATIONprocess for adding devices to their network. Refer to Multi-Tech's Cellular Activation sitehttp://www.multitech

USING LINUXUsing LinuxShell CommandsTesting Serial PortsTo test the serial ports created by the driver, type in a shell:Note: Sending ATE0 is required

USING LINUXipcp-accept-remote# Keep modem up even if connection fails#persist# Hardware flow controlcrtscts# Ask the peer for up to 2 DNS server addre

CONFIGURING AND COMMUNICATING WITH YOUR DEVICEConfiguring and Communicating with Your DeviceInteracting with Your Device OverviewThis section describe

CONFIGURING AND COMMUNICATING WITH YOUR DEVICE Type AT and press Enter.If the device responds with OK, you are communicating with the device.Verifyin

CONFIGURING AND COMMUNICATING WITH YOUR DEVICEChecking Network RegistrationBefore establishing a packet data connection, verify the is device register

MULTICONNECT®CELL 100 SERIES MTC-EV3 USER GUIDEMultiConnect®Cell 100 Series MTC-EV3 User GuideModel: MTC-EV3Part Number: S000586 1.0.3CopyrightThis pu

CONFIGURING AND COMMUNICATING WITH YOUR DEVICEEnter:AT!STATUS3. Configure socket parametersEnter:AT#SCFG=1,1,300,240,600,504. Activate context oneEnte

CONFIGURING AND COMMUNICATING WITH YOUR DEVICEAT!STATUS3. Configure socket parametersEnter:AT#SCFG=1,1,300,240,600,504. Activate context oneEnter:AT#S

CONFIGURING AND COMMUNICATING WITH YOUR DEVICEAT#SLUDP=1,1,7000The device responds with and unsolicited indication that a host is trying to connect to

CONFIGURING AND COMMUNICATING WITH YOUR DEVICEThe device responds with:CONNECT7. Send the file through the device.Closing the FTP Data ConnectionWhen

CONFIGURING AND COMMUNICATING WITH YOUR DEVICEEnter:AT#FTPGET="filename.txt" where filename.txt is the file you want to download.The device

CONFIGURING AND COMMUNICATING WITH YOUR DEVICE>Your message herewhere ########## is the recipient's number.3. Send the message.Enter CTRL+Z.Th

REGULATORY INFORMATIONRegulatory InformationNotice for Devices that Use Aeris RadiosOne component of your device is a radio. A radio algorithm prevent

REGULATORY INFORMATIONRestriction of the Use of Hazardous Substances (RoHS)Multi-Tech Systems, IncCertificate of Compliance2011/65/EUMulti-Tech System

REGULATORY INFORMATIONREACH StatementRegistration of SubstancesAfter careful review of the legislation and specifically the definition of an “article”

REGULATORY INFORMATIONInformation on HS/TS Substances According to Chinese StandardsIn accordance with China's Administrative Measures on the Con

CONTENTSContentsProduct Overview ...

REGULATORY INFORMATIONInformation on HS/TS Substances According to Chinese Standards (inChinese)依依照照中中国国标标准准的的有有毒毒有有害害物物质质信信息息根据中华人民共和国信息产业部 (MII) 制定的

CONTENTSConfiguring Device as UDP Client to Connect to UDP Server ...

PRODUCT OVERVIEWProduct OverviewAbout the MultiConnect Cell ModemThe MultiConnect® Cell 100 Series cellular MTC-EV3 modems are ready-to-deploy, standa

PRODUCT OVERVIEW LSDevices that have a USB connector have the following LEDs: Power LSThe tables that follow provide details about what the LEDs in

PRODUCT OVERVIEWNote: The power-saving switch— which appears with the NORMAL and LOW POWER labels—is includedonly on models that have a serial connect

PRODUCT OVERVIEWCategory DescriptionWeight 8.2 ounces or 230 gramsEnvironmentOperating -40° C to +85° CTemperature*Humidity Relative humidity 15% to 9

PRODUCT OVERVIEWPower Draw MTC-EV3USB5 volts Cellular call box Average measured Peak TX amplitude Total inrush chargeconnection no data current (amps)