Multitech MT1932ZDXK User Manual download pdf (Page 16)

DS 2.501A 16 - 16 03/03

Climate Controls Europe

Farnham Road

Slough

Berkshire SL1 4UH

United Kingdom

Telephone +44 (0)1753 611000

Facsimile +44 (0)1753 611001

Web site www.climate-uk.invensys.com

WARNING -

THESE DEVICES ARE AT MAINS AND/OR LOW VOLTAGE. DO NOT

EXCEED RATED VOLTAGE. LOCAL WIRING REGULATIONS AND

USUAL SAFETY PRECAUTIONS MUST BE OBSERVED.

Cautions

• Ensure good earthing.

• STATIC PRECAUTIONS: The components within these products can

be damaged by static electricity. In view of this anti-static

precautions should be taken when changing jumper, firmware

(EPROM) or handling the PCB.

• Do not apply any voltages until a qualified technician has checked

the system and the commissioning procedures have been

completed.If any equipment covers have to be removed during the

installation of this equipment, ensure that they are refitted after

installation to comply with UL and CE safety requirements.

• Observe wiring precautions.

• Do not exceed maximum ambient temperature.

• Interference with parts under sealed covers invalidates guarantee.

• Design and performance of Invensys equipment is subject to

improvement and therefore liable to alteration without notice.

• Information is given for guidance only and Invensys does not accept

responsibility for the selection or installation of its products unless

information has been given by the Company in writing relating to a

specific application.

• A periodic system and tuning check of the control system is

recommended. Please contact your local Invensys service office for

details

1 2 ... 11 12 13 14 15 16

No comments

Multitech MT1932ZDXK User Manual Page 16