Multitech GFU19 User's Guide download pdf (Page 13)

ANTENNA AND ACTIVATION INFORMATION

Antenna and Activation Information

Antenna

The antenna intended for use with this unit meets the requirements for mobile operating configurations and for

fixed mounted operations, as defined in 2.1091 and 1.1307 of the FCC rules for satisfying RF exposure compliance.

If an alternate antenna is used, consult user documentation for required antenna specifications.

EV-DO and CDMA Antenna Information

EV-DO and CDMA Authorized Antennas

These devices were approved with the following antenna:

Manufacturer: Exceltek Electronics Ltd.

Manufacturer's Model Number: C0081-ANG0002

Multi-Tech ordering information:

Model Quantity

ANQB-1HRA 1

ANQB-10HRA 10

ANQB-50HRA 50

EV-DO and CDMA Antenna Requirements

Category Description

Frequency Range 824 - 894 MHz / 1850 - 1990 MHz

Impedance 50 Ohms

VSWR VSWR should not exceed 2.0:1 at any point across the bands of operation

Typical Radiated Gain 2 dBi on azimuth plane

Radiation Omni-directional

Polarization Linear vertical

Antenna System Cellular Devices

The cellular/wireless performance depends on the implementation and antenna design. The integration of the

antenna system into the product is a critical part of the design process; therefore, it is essential to consider it early

so the performance is not compromised. If changes are made to the device's certified antenna system, then

recertification will be required by specific network carriers.

Account Activation for Cellular Devices

Some Multi-Tech cellular modems are pre-configured to operate on a specific cellular network. Before you can use

the modem, you must set up a cellular data account with your service provider. Each service provider has its own

MultiConnect

Cell 100 Series MTC-EV3 User Guide 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 29 30

No comments

Multitech GFU19 User's Guide Page 13