Multitech GFU19 User Manual download pdf (Page 79)

Reference Station GPS1200+ 79

Configure a NET

port step-by-step

In order to use a NET port for the remote interface connection, the RJ45 connector

of the GRX1200+/GRX1200+ GNSS must be connected to a network hub or router.

If connecting directly to a PC, a crossed Ethernet cable is required. The following

step-by-step description shows how to configure a NET port and assign the remote

interface to it. Refer to the GPS1200+ Technical Reference Manual and to the

"GRX1200+ Series - Getting Started" for more information.

Step Description

1. Main Menu: Config...\Instrument Settings...\Set NET Parameters

2. CONFIGURE Set NET Parameters

Enter the Internet Protocol address, the network mask and the gateway.

3. CONT (F1) returns to GPS1200+ Main Menu.

4. Main Menu: Config...\Interfaces...

5. CONFIGURE Interfaces

Highlight Remote.

6. EDIT (F3) to access CONFIGURE Remote Interfaces.

7. Highlight a NET port.

8. CTRL (F4) to access CONFIGURE Set NET Port.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 151 152

No comments

Multitech GFU19 User Manual Page 79