Multitech GFU19 User Manual download pdf (Page 71)

Reference Station GPS1200+ 71

)

Connect the device to transmit real-time data to port P1, P2 or P3 of the receiver.

Some devices fit into a clip-on-housing that plugs directly into these ports. Other

devices require an interface cable.

)

Unauthorised radio units should not be connected to the GRX1200+ Series.

Cable connection Cable connections are identical to other GPS1200+ receivers. Additional cables are

available from Leica Geosystems for the specific oscillator and Ethernet ports on the

GRX1200+.

Switch on Hold down the ON/OFF button on the receiver for at least 2 s.

Press PROG on the RX1200, if used.

Send a pulse/data to one of the serial ports. Port P1, P2 and P3 can be config-

ured not to allow receiver switch on upon pulse reception.

Switch off Press the ON/OFF button on the receiver for at least 4 s.

Press PROG and USER simultaneously on the RX1200, if used.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 151 152

No comments

Multitech GFU19 User Manual Page 71