Multitech GFU19 User Manual download pdf (Page 72)

72GPS1200+

Reference Station

Click on POWER DOWN in the Web Interface Tools menu.

Behaviour when

turning off and on

Turning the GRX1200+ Series off and on again resets the receiver. The conse-

quences are:

• If the configuration of the output is stored in the configuration set, standard

NMEA messages are still output.

• All data/message outputs scheduled via OWI or LB2 commands are no longer

output.

• Data logging parameters and interface configuration options, that have been set

by OWI or LB2 commands and have not been saved to a configuration set using

the corresponding OWI or LB2 command, are reset.

Behaviour after

power failure

After temporary power failure, the GRX1200+ Series will automatically power itself

up and resume the previously set operations including OWI or LB2 output. Two

power fail recovery options are available - Sudden Loss Only and Always. To

access the configuration select either:

• RX1200: Main Menu: Config...\General Settings...\Start Up & Power Down.

• Computer: Configuration - Start Up & Power Down in the web interface.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 151 152

No comments

Multitech GFU19 User Manual Page 72