Multitech MT2834ZDX Specifications download pdf (Page 20)

Quick Reference Guide

Step 3: Install the Modem in Windows

If you use Windows 95, Windows 98, or Windows NT 4.0, you must

install the modem in the operating system. (If you use Windows 3.1 or

another operating system, skip to Step 4.)

Adding the Modem to Windows

1. Make sure your modem is connected properly, then turn on your

computer. Windows should detect your new modem and open the

Install New Modem wizard.

Note: If Windows cannot detect your modem, the modem may be

turned off, it may be unplugged, it may be plugged into the wrong

connector on your computer, or the serial cable may be faulty. See

“None of the LEDs Light When the Modem Is Turned On” and “The

Modem Does Not Respond to Commands” in Chapter 7 of the

User

Guide

, “Solving Problems.”

2. If Windows identifies your modem correctly as a MultiTech Multi-

Modem or a MultiModem MT2834ZDX, click Next to install the mo-

dem. After the modem is installed, click Finish to exit.

3. If Windows cannot identify your modem (for instance, if it identifies

your modem as a “Standard Modem”), click Change. A dialog box

with a list of manufacturers and a list of modems appears.

4. Select Multitech Systems from the Manufacturers list.

5. Select MultiModem MT2834ZDX from the Models list.

6. Click Next. Windows installs and configures the modem.

7. Click Finish to exit.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 103 104

No comments

Multitech MT2834ZDX Specifications Page 20