Multitech RF802EW User's Guide Page 50

  • Download
  • Add to my manuals
  • Print
  • Page
    / 141
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 49
Multi-Tech Systems, Inc. RouteFinder RF802EW User Guide
Chapter 5 - Telnet
50
Note: If your ISP uses dynamic IP addressing, leave the External Port IP address and
External Gateway IP address at the default values of 0.0.0.0. Set the External IP Netmask to
the default value of 255.255.255.0.
LAN-to-LAN Access
To use the WAN port to connect to another LAN, you must configure the following:
Enter the IP and Netmask address of the network to which you are connecting.
g). Async Port Settings
The async port may be used for IP Routing or Remote Access. For more information,
see the Async Port section of the RouteFinder Manager chapter.
IP Routing
If you will use the async port for IP Routing, enter the following information as
described:
Telephone Number
Enter the phone number the async device must dial to connect to the remote system.
User Name
Enter the User Name that will be used for authentication on the remote system.
Password
Enter the Password associated with the User Name for the remote system.
Idle Timeout
Enter the amount of idle time allowed to pass before the connection times out. The default
value is 5 minutes.
Serial Baudrate
Use the list to select the appropriate baudrate of the modem attached to your async port.
You may need to select a lower speed to ensure a quality connection.
Modem Pre-Initial String
Consult your modem or ISDN TA User Guide for this information. The default value will work
for most analog modems.
Modem Initial String
Consult your modem or ISDN TA User Guide for this information.
Modem Dialup String
Consult your modem or ISDN TA User Guide for this information.
Modem Hangup String
Consult your modem or ISDN TA User Guide for this information.
Page view 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 140 141

Comments to this Manuals

No comments

Ricoh UC5 Handbücher

Bedienungsanleitungen und Benutzerhandbücher für Laser- / LED-Drucker Ricoh UC5.
Wir stellen 1 PDF-Handbücher Ricoh UC5 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung






Weitere Produkte und Handbücher für Laser- / LED-Drucker Ricoh

Modelle Dokumententyp
G183 Betriebsanleitung   Ricoh G183 Operating instructions, 284 Seiten
FAX1400L Betriebsanleitung   Ricoh FAX1400L Operating instructions, 88 Seiten
Aficio SP C232DN Spezifikationen   Ricoh Aficio SP C232DN Specifications, 288 Seiten
IS300e Bedienungsanleitung   PDF - ALL OFFICE EQUIPMENT, 4 Seiten
AFICIO MP01 Betriebsanleitung   Ricoh AFICIO MP01 Operating instructions, 152 Seiten