Multitech MTR-H6 User's Guide download pdf (Page 18)

MultiConnect rCell 100 Series User Guide 18

Setting up Wi-Fi and GPS

Some models have Wi-Fi capability. If your device supports this feature, you need use the device’s web

management interface to enable Wi-Fi. Then, see the online help file for information on working with Wi-Fi.

If your model can support a GPS, also see the online help file for information on working with a GPS.

Resetting the Device

To reset the device, when desired:

1. Find the hole in the panel labeled RESET. The reset button is recessed into the case.

2. To access the reset button, find a pin or similar thin object that can fit through the reset hole.

3. Use the pin to quickly press the reset button. Press the button until the Status Light goes out.

4. Release the pin from the reset button.

The device reboots.

Resetting the Device to Factory Defaults

You can reset the device so that custom configuration settings are cleared and replaced with default

configuration settings. Default settings can include OEM specific settings.

To reset the device to factory default settings, press the reset button for about 3 seconds, or until all LEDs

turn off. The device reboots.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25

No comments

Multitech MTR-H6 User's Guide Page 18