Multitech MTCMR-E1 User Manual Page 88
- Page / 119
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Chapter 14 – AT Commands
88 Universal IP AT Commands Reference Guide
#PPPSERVUN – Set User Name for Remote PPP Client
Description: When the TCP/IP stack behaves as a PPP server (according to the PPPMODE parameter), it
checks the remote PPP client login/password before granting access to the server.
This parameter defines the user name that must be specified by the remote PPP client.
Syntax: AT#PPPSERVUN=<value>
AT#PPPSERVUN? Read or display the current setting (or AT#VPPP, AT#VALL).
Values: Alpha-numeric ASCII text string up to 64 characters.
Default: No default.
#PPPSERVPW – Set Remote PPP Client Password
Description: When the TCP/IP stack behaves as a PPP server (according to the PPPMODE parameter setting),
it checks the remote PPP client login/password before granting access to the server.
This parameter defines the password that must be specified by the remote PPP client.
Syntax: AT#PPPSERVPW=<value>
AT#PPPSERVPW? Read or display the current setting (or AT#VPPP, AT#VALL).
Values: Alpha-numeric ASCII text string up to 64 characters.
Default: No default.
#APNPW – Set Access Point Name Password
Description: #APNPW is the Access Point Name password parameter coming with the APNUN from the GSM
operator and provides GPRS access.
Syntax: AT#APNPW=<value>
AT#APNPW? Read or display the current setting (or AT#VGPRS, AT#VALL).
Values: Alphanumeric ASCII text string up to 120 characters.
Default: No default.
#APNSERV – Set Access Point Name
Description: #APNSERV is the Access Point Name parameter coming from the GSM operator for providing
GPRS access.
Syntax: AT#APNSERV=<value>
AT#APNSERV? Read or display the current setting (or AT#VGPRS, AT#VALL).
Values: Alphanumeric ASCII text string up to 120 characters.
Default: No default.
#APNUN – Set Access Point User Name
Description: #APNUN is the Access Point Name User Name parameter coming with the APNPW from the
GSM operator for providing GPRS access.
Syntax: AT#APNUN=<value>
AT#APNUN? Read or display the current setting (or AT#VGPRS, AT#VALL).
Values: Alphanumeric ASCII text string up to 120 characters.
Default: No default.
- Universal IP 1
- Contacting Multi-Tech 2
- Contents 3
- Part 1 – AT Commands 10
- Set Commands 11
- &D – DTR Option 12
- &S – DSR ON or OFF 12
- <parity> 13
- +IFC – Set Flow Control 14
- +IPR – Set Serial Speed 14
- Display Commands 16
- Syntax: AT#VALL 18
- Responses – MT100SEM-IP only 18
- #RECiADD – Set Email Address 21
- #SMTPPW – Set SMTP Password 23
- #SMTPUN – Set SMTP User Name 23
- #POP3UN – Set POP3 User Name 28
- Display Command 29
- #FTPUN – Set FTP User Name 31
- #FTPPW – Set FTP Password 31
- Chapter 4 – FTP AT Commands 32
- #TCPTXDELAY – Time Delay 36
- Chapter 5 – TCP AT Commands 38
- Chapter 6 – UDP AT Commands 46
- #UDPPORT – UDP Port Number 47
- #UDPDLEMODE – Set DLE Mode 48
- Part 2 – AT Commands for the 53
- Part 3 – AT Commands 60
- Chapter 10 – IP AT Commands 62
- #WLANSSID – SSID of WLAN 70
- Chapter 13–WLAN AT Commands 72
- #WLAN? – WLAN Module 77
- Part 4 – 78
- Chapter 14 – AT Commands 80
- #ISPPW – Set ISP Password 84
- #ISPUN – Set ISP User Name 85
- Part 5 – GPIO AT Commands 91
- About GPIO 92
- Part 6 – AT Commands 95
- #GPSPORT – Set GPS Host Port 96
- - Disable 99
- (Disabled) 99
- GPS Message Syntax 100
- GPS Message Examples 101
- GPS Configuration Examples 101
- Introduction 102
- NMEA Protocol Overview 102
- SUPPORTED MESSAGE LIST 102
- NMEA MESSAGES 103
- GLL – Latitude/Longitude 104
- Part 7 – Appendixes 107
- Response Messages 108
- Error Codes 109
- Commands 110
- Responses 110
- TCP Socket Response Messages 112
- Act as a TCP Client: AT#OTCP 113
Related products and manuals for Networking Multitech MTCMR-E1
Networking Multitech MTCMR-G2 User's Guide
(56 pages)
(56 pages)
Networking Multitech MT2834ZPX User's Guide
(15 pages)
(15 pages)
Networking Multitech MT56DSU2 Owner's Manual
(39 pages)
(39 pages)
Networking Multitech MTCBA-C User's Guide
(16 pages)
(16 pages)
Networking Multitech RF760 User Manual
(16 pages)
(16 pages)
Networking Multitech MTCBA-G-F2 User Manual
(78 pages)
(78 pages)
Networking Multitech MTCBA-C User's Guide
(58 pages)
(58 pages)
Networking Multitech FR2201 User's Guide
(85 pages)
(85 pages)
Networking Multitech FF200 User's Guide
(68 pages)
(68 pages)
Networking Multitech MT1932ZDXI User's Guide
(177 pages)
(177 pages)
Networking Multitech GFU19 User's Guide
(30 pages)
(30 pages)
Networking Multitech MTR-C2 User Manual
(10 pages)
(10 pages)
Networking Multitech MTMC8-USB User's Guide
(28 pages)
(28 pages)
Networking Multitech ISIHI-2U User Manual
(60 pages)
(60 pages)
Networking Multitech RF760 User Manual
(12 pages)
(12 pages)
© 2020, manymanuals.com. All rights reserved. | 0.073 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals