
Part 3 – AT Commands for SocketWireless Wi-Fi- Devices
Universal IP AT Commands Reference Guide 65
These commands are for SocketWireless Wi-Fi Devices.
Set Commands
A – Manual Answer of TCP or UDP Connection
Description: Manual answer of a TCP or UDP connection.
Syntax: ATA
Values: N/A
Example: AT#WLANENABLE=1
Give command ATS0=0
Connect a TCP connection using command AT#TCPSTART=1/2
OK
RING… <ATA is issued)
Ok_Info_WaitingForData
S2 – Escape Sequence
Description: Use this command to change the character for the escape sequence.
Syntax: ATS2=<+>
Values: 'c' value, which is used as the escape sequence
Default: +
Example: ATS2?
+
OK
ATS2=+
OK
ATS2?
+
OK
A/ – Previous Command
Description: This command executes the previous command.
Syntax: A/
Values: No values.
Comments to this Manuals