Multitech SF100-G-EU Specifications download pdf (Page 57)

Chapter 4 – Using the MultiModem iSMS Web Interface

57 MultiModem® iSMS System Administrator’s Guide

Add a Broadcast Trigger

Note that the fields marked with an asterisk are required. This is a setup window; no messages are sent from this window.

Trigger Message

Type in a code or word that triggers the sending of the Broadcast Message.

Broadcast Message

Type in a message that is broadcast when the trigger code or word is received, or click Pre-Configured Message if you

want to use one of these messages as your broadcast message.

Encoding Type

Select the encoding type: ASCII, Extended ASCII or Unicode. This applies to both the Trigger Message and the Broadcast

Message. The received trigger message must be encoded in the same format as specified in the Broadcast Trigger,

otherwise the trigger does not match and the broadcast message is not sent. Default is ASCII.

Select the Groups who receive this broadcast message. Click Groups to display your list of group choices. If desired, you

can later highlight the name of a group and click Delete to remove a group from the list.

Authenticate

Check the Authenticate box if you want this trigger code or word and the broadcast message to be managed by the

authentication function. If this option is not enabled (unchecked), upon receipt of the Trigger Message the broadcast is

initiated.

When this option is enabled, the sender of the Trigger Message (phone number) is verified to be listed as an "Authentic

User" before the broadcast is initiated. If the Sender is not Authentic, the broadcast is not performed.

Authentic Users

Select the Authentic Users who are allowed to trigger a broadcast message.

Priority

Select a priority level from Low, Normal or High. Default is Normal.

Save or Cancel

Click Save, or if you change your mind and do not want the information saved, click Cancel.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 125 126

No comments

Multitech SF100-G-EU Specifications Page 57