Multitech RF560VPN User Manual download pdf (Page 12)

IAS Server Setup in Windows 2000

Multi-Tech Systems, Inc. Reference Guide 12

8. In the Shared secret box, type a password that both the IAS server and the NAS client will use to

mutually authenticate.

NOTE: You will need to enter this password on the NAS client computer. This password is case-

sensitive, can use alphanumeric characters as well as special characters, and can be up to 255

characters in length. A longer "shared secret" is more secure than a shorter one.

Retype the password in the Confirm shared secret box, and then click Finish. The client is

listed in the right pane of the Internet Authentication Service snap-in window.

Configure Remote Access Policies

When you configure your RRAS servers to use an IAS server for authentication, the Remote Access

Policies on the individual RRAS servers are no longer used. Instead, you must configure remote access

policies on the IAS server to control authentication for all remote access clients.

Create a Remote Access Policy

1. Start the IAS snap-in. To do this, click Start, point to Programs, point to Administrative Tools,

and then click Internet Authentication Service.

Click Remote Access Policies.

In the right pane of the Internet Authentication Service snap-in window, right-click Allow

access if dial-in permission is enabled, and then click Delete. Click Yes to confirm the

deletion.

On the Action menu, click New Remote Access Policy. Create a new remote access policy and

add the two rules. For additional information about how to create remote access policies, review

the references at the end of this document.

5. Now stop and restart the IAS client computer.

1 2 ... 7 8 9 10 11 12 13

No comments

Multitech RF560VPN User Manual Page 12