Multitech RF760 User's Guide download pdf (Page 6)

Chapter 1 – Introduction

6 Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L)

Safety Recommendations for Rack Installations

• Ensure proper installation of the RF760/660VPN in a closed or multi-unit enclosure by following the recommended

installation as defined by the enclosure manufacturer.

• IMPORTANT: Do not place the RF760/660VPN directly on top of other equipment or place other equipment directly

on top of the RF760/660VPN.

• If installing the RF760/660VPN in a closed or multi-unit enclosure, ensure adequate airflow within the rack so that

the maximum recommended ambient temperature is not exceeded.

• Ensure that the RF760/660VPN is properly connected to earth ground via a grounded power cord. If a power strip is

used, ensure that the power strip provides adequate grounding of the attached apparatus.

• Ensure that the main supply circuit is capable of handling the load of the RF760/660VPN. Refer to the power label

on the equipment for load requirements.

• Maximum ambient temperature for the RF760/660VPN is 50 degrees Celsius (120° F).

• This equipment should only be installed by properly qualified service personnel.

• Only connect like circuits. In other words, connect SELV (Secondary Extra Low Voltage) circuits to SELV circuits

and TN (Telecommunications Network) circuits to TN circuits.

Ship Kit Contents

The RouteFinder VPN is shipped with the following:

• One Multi-Tech Systems, Inc. RouteFinder VPN

• One Power Cord

• One printed Quick Start Guide

• One external Power Supply for the RF600VPN.

Note: The power supply for the RF760VPN and RF660VPN is internal.

• Two Rack Mounting Brackets and four mounting screws.

Note: See the User Guide on the documentation CD for rackmounting directions.

• One RouteFinder VPN documentation CD which contains documentation, license agreements, Adobe Acrobat

Reader, and License keys.

• One RouteFinder VPN Software Recovery CD.

Warning: Do not use the Software Recovery CD for any purpose except for re-installing software onto the RouteFinder VPN

hard drive.

Note: If any of these items are missing, contact Multi-Tech Systems or your dealer or distributor. Inspect the contents for

signs of any shipping damage. If damage is observed, do not power up the RouteFinder VPN; contact Technical Support at

Multi-Tech Systems, Inc. for advice.

License Keys

Where to find the License Key Number Label: The VPN License Key number and the URL License Key number are

printed on labels and are placed on the bottom of the RouteFinder chassis, on the hard drive inside the chassis, and on the

front cover of the Quick Start Guide. These license numbers will have to be entered into the RouteFinder configuration setup

using the RouteFinder built-in software.

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

No comments

Multitech RF760 User's Guide Page 6